EWHA WOMANS UNIVERSITY

Taeyong Lee Professor

Department of Mechanical & Biomedical Engineering/ Graduate Program in System Health and Engineering

Research Cooperation Building #358
02-3277-2795
Office hours
- Tues Thr 2-4 PM
Research Interests

Research Record

Gradient Enhanced-Expert Informed Neural Network (GE-EINN) for forming depth prediction from a small-scale metal stamping dataset Journal of Manufacturing Processes, 2025, v.140, 224-240
SCIE Scopus dColl.
Optimizing the graft size in the Evans osteotomy to minimize the calcaneocuboid joint pressure by highly realistic in-silico analysis SCIENTIFIC REPORTS, 2025, v.15 no.1, 2668
SCIE Scopus dColl.
Super-fast and accurate nonlinear foot deformation Prediction using graph neural networks JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2025, v.163, 106859
SCIE Scopus dColl.
Gaussian process regression-driven deep drawing blank design method International Journal of Mechanical Sciences, 2024, v.265, 108898
SCIE Scopus dColl.
Influence of Grinding Tool Mesh Size and Rotational Speed on Post-Machining Quality of CFRP Laminates by Acceleration Signal and Surface Roughness Analyses Journal of Composites Science, 2024, v.8 no.12, 543
Scopus dColl.
On Improving Sheet Metal Formability in Hydrodynamic Deep Drawing Process through a Solid-Oil-Type Mineral Grease Pressure Medium Steel Research International, 2024, v.95 no.1, 2300324
SCIE Scopus dColl.
Radiographic Evaluation of the Association between Foot Deformities and Ankle Medial Osteoarthritis CiOS Clinics in Orthopedic Surgery, 2024, v.16 no.1, 125-133
Scopus KCI dColl.
Counter-Rotating Hoop Stabilizer and SVR Control for Two-Wheels Vehicle Applications IEEE Access, 2023, v.11, 14436-14447
SCIE Scopus dColl.
Extreme gradient boosting-inspired process optimization algorithm for manufacturing engineering applications Materials and Design, 2023, v.226, 111625
SCIE Scopus dColl.
Manufacturing Process, Tensile-Compressive, and Impact Properties of Tungsten (W)-Particle-Reinforced SLA Methacrylate Polymers, 2023, v.15 no.24, 4728
SCIE Scopus dColl.
Single and Multiple Gate Design Optimization Algorithm for Improving the Effectiveness of Fiber Reinforcement in the Thermoplastic Injection Molding Process Polymers, 2023, v.15 no.14, 3094
SCIE Scopus dColl.
Effects of shear-thickening polymer on force attenuation capacities in hip protectors Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022, v.236 no.8, 3881-3885
SCIE Scopus dColl.
Cycling kinematics in healthy adults for musculoskeletal rehabilitation guidance BMC MUSCULOSKELETAL DISORDERS, 2021, v.22 no.1, 1044
SCIE Scopus dColl.
Relationship between ankle varus moment during gait and radiographic measurements in patients with medial ankle osteoarthritis PLOS ONE, 2021, v.16 no.6, e0253570
SCIE Scopus dColl.
Force attenuation properties of shear-thickening polymer (STP)-based hip protector in simulated sideways fall JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020 , 5351-5357
SCIE Scopus KCI dColl.
Identification of potential plantar ulceration among diabetes patients using plantar soft tissue stiffness JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, v.103, UNSP 103567
SCIE Scopus dColl.
Strain-rate dependence of viscous properties of the plantar soft tissue identified by a spherical indentation test Journal of the Mechanical Behavior of Biomedical Materials, 2020, v.102, 103470
SCIE Scopus dColl.
Assessment of finite element models for prediction of osteoporotic fracture Journal of the Mechanical Behavior of Biomedical Materials, 2019, v.97, 312-320
SCIE Scopus dColl.
Biomechanical Effects of Variable Stiffness Shoes in Normal Walking After 60-minute Adaptation INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, v.20 no.10, 1817-1823
SCIE KCI dColl.
Heel pad becomes rapidly stiffer to dissipate the energy: finite element analysis Footwear Science, 2019, v.11 no.sup1, S79-S80
Scopus dColl.
Investigation of the relationship between localized cumulative stress and plantar tissue stiffness in healthy individuals using the in-vivo indentation technique Journal of the Mechanical Behavior of Biomedical Materials, 2019, v.98, 157-162
SCIE Scopus dColl.
Biomechanical effects of variable stiffness shoes in normal walking after 60-minute adaptation Footwear Science, 2017, v.9, S146-S147
Scopus dColl.
Dynamic measurement of surface strain distribution on the foot during walking Journal of the Mechanical Behavior of Biomedical Materials, 2017, v.69, 249-256
SCIE Scopus dColl.
In-vivo viscous properties of the heel pad by stress-relaxation experiment based on a spherical indentation Medical Engineering and Physics, 2017, v.50, 83-88
SCIE Scopus dColl.
Parameter identification of hyperelastic material properties of the heel pad based on an analytical contact mechanics model of a spherical indentation Journal of the Mechanical Behavior of Biomedical Materials, 2017, v.65, 753-760
SCIE Scopus dColl.
The biomechanical effects of split-sole shoes on normal walking Footwear Science, 2017, v.9, S143-S145
Scopus dColl.
The use of shear thickening polymer as a hip protecter Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 2017 , 1633-1635
Scopus dColl.
Analysis of compressive load on intervertebral joint in standing and sitting postures TECHNOLOGY AND HEALTH CARE, 2016, v.24 no.2, 215-223
SCIE Scopus dColl.
Enhanced viscoelastic properties of nickel–aluminum–bronze alloyed with indium or its alloys Advanced Composite Materials, 2016, v.26 no.1, 1-10
SCIE Scopus dColl.
Prediction of plantar soft tissue stiffness based on sex, age, bodyweight, height and body mass index JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2016, v.54, 219-222
SCIE Scopus dColl.
The Influence of Various Seat Design Parameters: A Computational Analysis HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES, 2016, v.26 no.3, 356-366
SCIE SSCI Scopus dColl.
Comparative Effects of Ibandronate and Paclitaxel on Immunocompetent Bone Metastasis Model YONSEI MEDICAL JOURNAL, 2015, v.56 no.6, 1643-1650
SCIE Scopus KCI dColl.
[학술지논문] Gradient Enhanced-Expert Informed Neural Network (GE-EINN) for forming depth prediction from a small-scale metal stamping dataset JOURNAL OF MANUFACTURING PROCESSES, 2025, v.140 no.140 , 224-240
SCIE
[학술지논문] Heel pad’s hyperelastic properties and gait parameters reciprocal modeling by a Gaussian Mixture Model and Extreme Gradient Boosting framework BIOMEDICAL SIGNAL PROCESSING AND CONTROL, 2025, v.107 no.107 , 107818-107818
SCIE
[학술지논문] Optimizing the graft size in the Evans osteotomy to minimize the calcaneocuboid joint pressure by highly realistic in-silico analysis SCIENTIFIC REPORTS, 2025, v.15 no.2668 , 1-11
SCIE
[학술지논문] Influence of Grinding Tool Parameters on Post-Machining Quality of CFRP Laminates through Acceleration Signal and Surface Roughness Analysis Journal of Composites Science, 2024, v.8 no.12 , 543-543
Scopus
[학술지논문] On Improving Sheet Metal Formability in Hydrodynamic Deep Drawing Process through a Solid-Oil-Type Mineral Grease Pressure Medium STEEL RESEARCH INTERNATIONAL, 2024, v.95 no.1 , 1-9
SCIE
[학술지논문] Radiographic Evaluation of the Association between Foot Deformities and Ankle Medial Osteoarthritis CiOS Clinics in Orthopedic Surgery, 2024, v.16 no.1 , 125-133
SCIE
[학술지논문] Counter-Rotating Hoop Stabilizer and SVR Control for Two-Wheels Vehicle Applications IEEE ACCESS, 2023, v.11 no.11 , 14436-14447
SCIE
[학술지논문] Manufacturing Process, Tensile-Compressive, and Impact Properties of Tungsten (W)-Particle-Reinforced SLA Methacrylate POLYMERS, 2023, v.15 no.24 , 4728-4728
SCIE
[학술지논문] Single and Multiple Gate Design Optimization Algorithm for Improving the Effectiveness of Fiber Reinforcement in the Thermoplastic Injection Molding Process POLYMERS, 2023, v.15 no.14 , 3094-3094
SCIE
[학술지논문] Cycling kinematics in healthy adults for musculoskeletal rehabilitation guidance BMC MUSCULOSKELETAL DISORDERS, 2021, v.22 no.1 , 1044-1044
SCIE
[학술지논문] Force attenuation properties of shear-thickening polymer (STP)-based hip protector in simulated sideways fall JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, v.34 no.12 , 5351-5357
SCIE
[학술지논문] Identification of potential plantar ulceration among diabetes patients using plantar soft tissue stiffness JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, v.103 no.0 , 103567-103567
SCIE
[학술지논문] Strain-rate dependence of viscous properties of the plantar soft tissue identified by a spherical indentation test JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, v.102 no.0 , 103470-103470
SCIE

2024-2nd
- Mechanical Design and Drawing
  - Subject No 38558Class No 01
  - 1Year ( 2Credit , 3Hour) Mon 4~5 (ESEA)
  - Exchange students are not allowed
- Mechanical Design and Drawing
  - Subject No 38558Class No 02
  - 1Year ( 2Credit , 3Hour) Mon 6~7 (ESEA)
  - Exchange students are not allowed
- Rehabilitation Engineering
  - Subject No 38585Class No 01
  - 3Year ( 3Credit , 3Hour) Wed 3~3 (ESEA) , Fri 2~2 (CH)
2024-1st
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 01
  - 1Year ( 2Credit , 2Hour) Wed 3~3 (ENG ) , Fri 2~2 (159)
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 02
  - 1Year ( 2Credit , 2Hour) Mon 2~2 (ENG ) , Thu 3~3 (161)
- Biomechanics
  - Subject No 38566Class No 01
  - 3Year ( 3Credit , 3Hour) Wed 6~6 (ESEA) , Fri 4~4 (CH)
- Mechanical and Biomedical Engineering Experiment Ⅰ 강의 계획서 상세보기
  - Subject No 38571Class No 01
  - 3Year ( 3Credit , 4.5Hour) Tue 5~7 (ENG )
- Mechanical and Biomedical Engineering Experiment Ⅰ 강의 계획서 상세보기
  - Subject No 38571Class No 02
  - 3Year ( 3Credit , 4.5Hour) Fri 5~7 (ENG )
- Introduction to System Health
  - Subject No G18067Class No 01
  - Year ( 3Credit , 3Hour) Thu 7~8
- Global Industry-University Cooperation Program
  - Subject No G18389Class No 01
  - Year ( 3Credit , 3Hour) Tue 4~5 (ENG )
- Introduction to System Health
  - Subject No G18441Class No 01
  - Year ( 3Credit , 3Hour) Thu 7~8
  - Professor Changed
2023-2nd
- Mechanical Design and Drawing
  - Subject No 38558Class No 01
  - 1Year ( 2Credit , 3Hour) Mon 2~3 (ESEA)
- Mechanical Design and Drawing
  - Subject No 38558Class No 02
  - 1Year ( 2Credit , 3Hour) Mon 6~7 (ESEA)
- Rehabilitation Engineering
  - Subject No 38585Class No 01
  - 3Year ( 3Credit , 3Hour) Wed 3~3 (ESEA) , Fri 2~2 (CH)
- System Health Creative Project
  - Subject No G18084Class No 01
  - Year ( 3Credit , 3Hour) Tue 4~5 (ECOL607)
2023-1st
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 01
  - 1Year ( 2Credit , 2Hour) Tue 2~2 (ENG ) , Fri 3~3 (159)
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 02
  - 1Year ( 2Credit , 2Hour) Wed 3~3 (ENG ) , Fri 2~2 (159)
- Solid Mechanics
  - Subject No 38565Class No 01
  - 2Year ( 3Credit , 3Hour) Tue 7~7 (ENG ) , Fri 6~6 (159)
- Biomechanics
  - Subject No 38566Class No 01
  - 3Year ( 3Credit , 3Hour) Mon 7~7 (ESEA) , Thu 7~7 (CH)
- Mechanical and Biomedical Engineering Experiment I 강의 계획서 상세보기
  - Subject No 38571Class No 01
  - 3Year ( 3Credit , 4.5Hour) Tue 5~7 (ENG )
- Mechanical and Biomedical Engineering Experiment I 강의 계획서 상세보기
  - Subject No 38571Class No 02
  - 3Year ( 3Credit , 4.5Hour) Fri 5~7 (ENG )
- Introduction to System Health 강의 계획서 상세보기
  - Subject No G18067Class No 01
  - Year ( 3Credit , 3Hour) Thu 7~8
- Global Industry-University Cooperation Program
  - Subject No G18389Class No 01
  - Year ( 3Credit , 3Hour) Thu 4~5 (ENG )
- Introduction to System Health
  - Subject No G18441Class No 01
  - Year ( 3Credit , 3Hour) Thu 7~8
2022-2nd
- Mechanical Design and Drawing
  - Subject No 38558Class No 01
  - 1Year ( 2Credit , 3Hour) Mon 2~3 (ESEA)
- Mechanical Design and Drawing
  - Subject No 38558Class No 02
  - 1Year ( 2Credit , 3Hour) Mon 6~7 (ESEA)
- Rehabilitation Engineering
  - Subject No 38585Class No 01
  - 3Year ( 3Credit , 3Hour) Tue 5~5 (ESEA) , Thu 6~6 (CH)
- Technology startup process practice
  - Subject No 39191Class No 01
  - Year ( 3Credit Wed 4~5 (ESEA)
- System Health Creative Project
  - Subject No G18084Class No 01
  - Year ( 3Credit , 3Hour) Wed 7~8 (ECOL-607)
2022-1st
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 01
  - 1Year ( 2Credit , 2Hour) Tue 5~5 , Thu 6~6
- Introduction to Mechanical and Biomedical Engineering
  - Subject No 38559Class No 02
  - 1Year ( 2Credit , 2Hour) Mon 6~6 , Wed 5~5
- Solid Mechanics
  - Subject No 38565Class No 01
  - 2Year ( 3Credit , 3Hour) Wed 6~6 , Fri 4~4
- Biomechanics
  - Subject No 38566Class No 01
  - 3Year ( 3Credit , 3Hour) Wed 3~3 , Fri 2~2
- Mechanical and Biomedical Engineering Experiment I
  - Subject No 38571Class No 02
  - 3Year ( 3Credit , 4.5Hour) Fri 5~7 (ENG )
- Capstone Project in Content Convergence
  - Subject No 38588Class No 01
  - 4Year ( 3Credit , 4.5Hour) Mon 2~2 (ENG A) , Thu 2~3 (101)
- Introduction to System Health
  - Subject No G18067Class No 01
  - Year ( 3Credit , 3Hour) Thu 7~8
- Global Industry-University Cooperation Program
  - Subject No G18389Class No 01
  - Year ( 3Credit , 3Hour) Mon 4~5 (-)

Academic Background

University of Wisconsin, Madison Ph.D.(Biomedical Engineering)

Work Experience

National University of Singapore 2005-07-25 ~ 2014-02-28

Johns Hopkins University 2004-02-09 ~ 2005-07-11

Harvard Medical School 2001-11-01 ~ 2003-12-31

Taeyong Lee Professor

Research Record

Courses

Academic Background

Work Experience